Radial Drilling Machine

These products are widely used for drilling, counter boring, reaming, spot facing and tapping.

 

1. Pleasing appearance and hormonized arrangement of related components.

2. Main parts and key parts are made by high strength cast and special steel material.

3. Adopting hydraulic pre-selection speed and feed change mechanisms, and is sensitive and reliable.

4. Mechanical and electrical controls are centralized on the headstock. With wast and rapid operation. 

5. The main ways are all case-hardened so as to prolong the service life of the machine.

6. Provide all kinds of special accessories of drilling and boring machine.

 

Main Specifications

   

Z3032 

x 8/1

Z3025 

x 10/1

Z3032 

x 10/1

Z3035 

x 10/2

Z3035 

x 13

Z3725 

x 8

Z3732 

x 8

Max. Drilling Diameter mm 32 25 32 35 35 25 32
Distance between Spindle Axis and Column Max. mm 820 1000 1000 1000 1300 800 800
Min. mm 320 300 300 300 300 325 325
Distance between Spindle Nose and Working Surface of Base Max. mm 850 1030 1000 1200 1120 800 770
Min. mm 90 250 220 450 300 40 10
Spindle Travel mm 240 280 280 280 280 130 130
Spindle Taper No. Morse No4 Morse No3 Morse No4 Morse No4 Morse No4 Morse No3 Morse No4
Range of Spindle Speeds r/min 75-1220 32-2500 32-2500 32-2500 32-2500 63-860 63-860
Number of Spindle Speeds - 6 16 16 16 16 6 6
Range of Spindle Feeds mm/r 0.10-0.25 0.10-1.25 0.10-1.25 0.10-1.25 0.10-1.25 0.08-0.27 0.08-0.27
Number of Spindle Feeds - 3 8 8 8 8 4 4
Power of Main Motor kW 1.5 1.5 2.2 3 3 1.1 1.5
Overall Dimensions (LxWxH) mm

1417

x720

x1885

1760

x800

x2050

1760

x800

x2050

1760

x800

x2250

1760

x900

x2310

1658

x720

x1395

1658

x720

x1395

Net Weight kg 1200 1600 1600 1700 2500 1000 1000